TP-Link CPE220 2.4 GHz 300 Mbps 12 dBi Outdoor CPE
รหัสสินค้า : CPE220
| ราคา |
2,150.00 บาท |
| จำนวนที่จะซื้อ | |
| ราคารวม | 2,150.00 บาท |
สินค้าไม่เพียงพอ
สินค้าหมด
TP-Link CPE22- 2.4 GHz 300 Mbps 12 dBi Outdoor CPE
Model : CPE220
มีราคาพิเศษ งานโครงการ ช่าง ร้านค้า ผู้รับเหมา และออกเอกสารงานโครงการ ตัวแทนเป็นทางการ
พร้อมบริการ แนะนำติดตั้ง ใช้งาน เซ็ต ตั้งค่า ทดสอบเบื้องต้นให้
ติดต่อสอบถามทักไลน์ 0897993376
PORT: 1× 10/100 Mbps Shielded Ethernet Port (LAN 0, Passive PoE in); 1 × 10/100 Mbps Shielded Ethernet Port (LAN 1)
SPEED: 300 Mbps at 2.4 GHz
FEATURE: 12 dBi, 13+ km, IPX5 Weatherproof, Passive PoE, MAXtream TDMA, Centralized Management, Spectrum Analyzer, AP/Client/AP Router/AP Client Router/Repeater/Bridge mode
คู่มือการตั้งค่าติดตั้งอุปกรณ์ TP-Link Wireless Bridge EAP Bridge Kit Installation Manual Guide
2.4GHz 300Mbps 12dBi Outdoor CPE
- Built-in 12dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 30dBm/1000mw
- System-level optimizations for more than 13km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotel
คู่มือติดตั้งตั้งค่า TP-Link Managed Switch User Guide
คู่มือติดตั้งตั้งค่า หาค่าไอพี ของอุปกรณ์ How to find IP address of TP-Link Omada Devices
คู่มือการตั้งค่าสร้าง VLAN Config บนแอพสมาร์ทโฟน Omada App
คู่มือการตั้งค่า DHCP Server ในสวิตซ์ How to setup Switch as DHCP server on Omada Controller
คู่มือการตั้งค่า Ling Aggregation How to configure LAG (LACP) on Omada Switches via Omada Controller
คู่มือการตั้งค่า How to configure QoS on Omada Switches in Standalone Mode
คู่มือตั้งค่า How to configure VLAN Interfaces and Static Routes on Omada Switches
คู่มือการตั้งค่า How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
คู่มือการตั้งค่า TP-Link VLAN How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
คู่มือการตั้งค่าหลาย SSID Configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches
คู่มือการตั้งค่า VLAN 802.1Q How to configure 802.1Q VLAN on Omada Switches when used with a third-party router
คู่มือการตั้งค่า 802.1X VLAN How to configure 802.1X VLAN Assignment on Omada Controller
คู่มือการตั้งค่า IGMP IPTV Snooping How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
คู่มือการตั้งค่า How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
คู่มือการตั้งค่า Auto VoIP How to configure Auto-VoIP on Omada Switches via Omada Controller
คู่มือการเช็คตรวจสอบ Voice VLAN Auto VoIP Troubleshooting for Voice VLAN and Auto VoIP
คู่มือการตรวเช็คค่าระบบ multicast video on TP-Link Omada switches
คู่มือการตั้งค่าดูสถานะพอร์ตสวิตซ์ How to configure Switch Port Mirroring on Omada Controlle
คู่มือการตั้งค่า Troubleshooting guide for TACACS+ Authentication Fails on Omada Switch
คู่มือการเช็คค่าระบบของ ARP Troubleshooting guide for ARP Learning Failure
คู่มือการเช็คตั้งค่าระบบ SNMP Troubleshooting for abnormal SNMP interactions on Omada switch
คู่มือการตั้งค่า ACL ACL configuration on Omada Switch
คู่มือการใช้งานเครื่องมือ Ping ใน Omada App
คู่มือการตั้งค่า How to configure Jumbo Frame on Omada Controller
คู่มือการตั้งค่า Omada Switch DHCP Relay Configuration Guide
คู่มือการตั้งค่า DHCP Option Configuration guide of DHCP Options on Omada Switch
คู่มือการตั้งค่าระบบ CoS How to configure Class of Service (CoS) through Omada Controller
คู่มือการตั้งค่า How to configure sFlow on TP-Link Omada Switches
คูมือการตั้งค่า How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
ความแตกต่างระหว่างบัญชี Master Administrator, Administrator และ Viewer ใน Omada Controller
คุณสมบัติ Access Point Outdoor TP-LINK (CPE220) Wireless N300 (2.4GHz) 12dBi
BrandTP-LINKModelCPE220
Standards and ProtocolIEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietary Protocol : TDMA Mode (with Pharos MAXtream enabled)
AntennaBuilt-in 12dBi 2x2 Dual-polarized Directional Antenna
Beam Width: 60° (H-Plane) / 30° (E-Plane)
Note: For more details, please refer to datasheet
Frequency Range2.4~2.483GHz
Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
Wireless Transmit Power30dBm/1000mw (Adjustable power by 1dBm)
Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
ProcessorQualcomm Atheros 560MHz CPU, MIPS 74Kc
Memory64MB DDR2 RAM, 8MB Flash
Interfacex1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
x1 10/100Mbps Shielded Ethernet Port (LAN1)
x1 Grounding Terminal
x1 Reset Button
Data RatesUp to 300Mbps (40MHz,Dynamic)
Up to 144.4Mbps (20MHz,Dynamic)
Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic)
Security15KV ESD Protection
6KV Lightning Protection
Power SupplyPassive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
Voltage range : 16-27VDC
Power Consumption : 10.8 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
CertificationsCE, FCC, RoHS, IPX5
Package ContentsOutdoor Wireless CPE
24V 0.6A Passive PoE Adapter
Pole Mounting Straps
AC Power Cord
Installation Guide
Management / Configuration / ToolsDiscovery and Remote Management via Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH Server
Support Operating SystemMicrosoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
-Enclosure : Outdoor ASA stabilized plastic material
IPX5 waterproof Certification
POE ADAPTER FEATURES
Dimensions(W x D x H) : 110×57×33.5mm
Input Current : 0.8A Max @ 100VAC
Input Voltage : 100VA~240VAC @ 50Hz~60Hz
Output : 24VDC, 1.0A Max / +4, 5pins; -7, 8pins.(Support up to 60m Power over Ethernet)
Efficiency : >80%
Output Voltage : 24VDC(+4,5pins; -7,8pins)
Input : 100-240VAC, 50/60Hz
Power Status LEDs : 0~0.8A: Green / 0.8A~1.0A: Red
Certifications : CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
Interfaces : 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data)
Operating TemperatureOperating Temperature: -40°C~70°C (-40°F~158°F)
Storage TemperatureStorage Temperature: -40°C~70°C (-40°F~158°F)
Storage HumidityStorage Humidity: 5%~95% non-condensing
Relative HumidityOperating Humidity: 10%~90% non-condensing
Package Dimension(W x D x H) : 14.00 x 33.00 x 10.00 cmGross Weight0.90 KGVolume4,620.00 cm3




